CUSTOM LOWER CONTROL ARMS
HEIM JOINT FOR ALL 65-69 PASSENGER CARS
Heim joint rear lower control arms are not new - But we believe we can offer you a new and
superior alternative.
* 6061 T-6 (Aircraft grade) Aluminum. Much stronger than inferior steel.
* Solid, one piece construction for the arms. Stronger than tubular. No welds
to stress.
* Heavy duty heim joints with lock nuts and special side seals included*
* Weighs less than 2.5 lbs per side!! (Crude steel types are 10 lbs! - stock are
7 lbs)
* Specially machined "1" wrench flat" for precise and easy adjustment
* Excellent finish as-is or ready for polishing
Closeup of the ends and a good look at the quality of the machining. One end is RH thread and
other end is LH thread. Note special self locking nut and wrench flat for ease of adjustment.
*Each set comes complete with special side seals - These expensive seals are included with each
pair of arms that you buy! another unique feature that will extend the life of the heim joints.
These are designed for racing (or other off road use) use
ONLY!
The stock control arms have a rubber bushing in each end. This is to absorb shock and prevent
stress to the various attaching components. Heim joints have NO shock absorbing characteristics!
If you use them in a "street' car on the street you run the risk of eventual damage (cracking) to the
differential case and associated brackets!
If you want upgraded performance rear control arm assemblies for your 65-69 street car then
you should check out our urethane/polygraphite arms
1965-69 REAR HEIM JOINT LOWER CONTROL ARMS -
PN U-6166 Includes both arms, spacers, seals, heim joints and lock nuts.
Only $229.50
Replacement SEALS U-6167 $4.95 each
GoVair HOME PAGE