*******Note new options for these arms - See Below!! *****

URETHANE LOWER CONTROL ARMS

Shown above - 90 durometer urethane Performance arms (top two) and 75 durometer Improved Street arms (lower two)

Forget about press-in bushings!

Forget about unpredictable nylon inserts!

Upgrade even street cars to modern Urethane!

The original 1965-69 Corvair rear lower control arms came from the factory with vulcanized rubber (probably neoprene) bushings. If you needed to replace them you bought the whole arm with new vulcanized bushings.

In the late 70's Corvair vendors started offering press-in steel shell bushings (we've sold a lot of them). They work ok but are not the ideal solution. At the same time performance minded individuals started using press-in nylon inserts (we've sold those too). They work ok but shouldn't be used in street cars because they're too rigid. Furthermore it was impossible to "fine tune" the durometer (hardness/softness) with either type.

Enter then a raft of "home-cast" urethane arm assemblies. They had the right idea but quality control was generally poor and the arms got a bad reputation.

We've solved all those problems!

* Our 75 durometer "Street" assemblies are slightly stiffer than OEM, which gives you better control, yet has none of the disadvantages of nylon or heim joint assemblies.
* Our 90 durometer "Performance" arms are much stiffer to offer the greater control you're looking for without the extreme degree of rigidity found in nylon and heim joint arms. We believe that these arms are ok for the street!
*Urethane has a number of advantages over the original "rubber". It is impervious to most chemicals (such as transmission fluid). It's elasticity and ability to hold it's shape (cold flow) is excellent. And any range of durometers is possible.

* Our urethane process is done by a professional company that has perfected this process - No more "bathtub" urethane!

These arms are in stock now! Order today to avoid delays!

ARMS CAN BE USED ON EITHER RH OR LH

75 DUROMETER STREET Each U-6152 $89.50 plus core*

90 DUROMETER PERFORMANCE Each U-6153 $94.75 PLUS CORE*

AND NOW ALL NEW - 90 Durometer on one end and 75 on the other! (Avail now!) $99.50 plus core $20.00 each .

HEIM JOINT FULL RACE CLICK HERE

* These arms come cleaned and painted and require your old arms or a core charge of $20.00 per arm. The core will later be refunded when a straight core arm is sent back to us. We also need the two inner sleeves as well.